2.13.1.4. CAD/BIM
2.13.1.4.4. Transfer dimensionings from PARTsolutions to CAD
Prev  Next
2.13.1.4.4. Transfer dimensionings from PARTsolutions to CAD

When exporting, as of V11, PARTsolutions dimensionings are transferred to the CAD.

Currently (SP0) the function is available for Creo Parametric.

In Creo Parametric the dimensioning are displayed under "Annotation Display".

In Creo Parametric the dimensioning are displayed under "Annotation Display".

If the transfer to CAD is not desired, you can turn it off via configuration file.

$CADENAS_SETUP/ifproewildfire.cfg 

[CreationOptions]
CreateDimensions=1

Value range:

  • 1: on (default)

  • 0: off

Prev Up Next
2.13.1.4.3. NX: Testing PARTsolutions parts in the Mechatronics Concept Designer Home 2.13.1.4.5. NX: Neue Feature Dialoge