3.1.9.3. Export graphic formats
3.1.9.3.1. BMP GIF JPEG PNG TIFF
Prev  Next
3.1.9.3.1. BMP GIF JPEG PNG TIFF

You can export the part displayed in the part view in several image formats.

The export dialog boxes of BMP, GIF, JPEG, PNG and TIFF format are nearly identic, the differences are marked.

Attributes tab page

Attributes " tab page (PNG format as an example)

Attributes " tab page (PNG format as an example)

  • Selection:

    You can export all the views listed or only those that are specifically activated. Select a mode:

    • All Views

      • Window

        • Window (3D-View)

        • Window (Technical view (2D))

      • Active document

      • 2D derivation (...)

        Different derivations such as "3 views + isometric drawing in frame (DIN)" or "Right" for example.

      • Technical view

        Different technical views such as "Front view" for example

  • Size:

    • Picture size

      The following options are available for specifying the image size [Picture size]:

      • Fixed sizes (e.g. 100x100). The specification is made in pixel.

      • STANDARD: The currently set size from the 3D view [Model Viewer] is used.

      • Freely defined [Free defined]: Define the image dimensions yourself in the Width in pixels and Height in pixels input fields.

    • Width / Height (The fields are activated if the option Freely defined [Free defined] has been selected under Image size [Picture size] )

    • DPI: Print resolution (only for BMP, JPEG, PNG, TIFF)

  • Picture options

    • Transparent background

    • 3D settings [3D Options]:

      • Current view

      • -PARTsolutions 8.1-

      • -PARTsolutions 9.0-

      • Purist

      • etc.

    • 2D derivation view:

      • Line representation [Line view]:

        Line view

        Line view

      • Lines + shaded representation [Lines + shaded view]:

        Lines + shaded view

        Lines + shaded view

        Combination of line view and shaded view

      • Shaded view [Shaded View]:

        Shaded view

        Shaded view

      Detailed information on this is found under Section 3.1.10.1.2.1, “ Render mode ”.

    • Shortened [2D shortened view] 2D view:

      Precondition for the use is that the respective option is provided by the manufacturer.

      Advantageously for overlong parts. The shortened part will also display the real dimensionings.

      Result after export with option "Shortened 2D view [2D shortened view] " deactivated

      Result after export with option "Shortened 2D view [2D shortened view] " deactivated

      Result after export with "Shortened 2D view [2D shortened view] " option activated

      Result after export with "Shortened 2D view [2D shortened view] " option activated

  • Target file [Destination file]:

    Use Browse ... to specify the target file.

    Optionally activate the Open directory after export (once) [Open directory after export(once)] checkbox.

Tiff options tabbed page (only at TIFF)

  • Color format: RGB or CYMK

  • Compression: Non-compressed [Not compressed] and different compression variants

.

Prev Up Next
3.1.9.3. Export graphic formats  Home 3.1.9.3.2. Animated GIF