Identification data: See ???.

Insert Fixed plane: See Section 7.6.2.1, “ Fixed plane ”.

Exchange base planes: See Section 7.6.4.3, “ Exchange base planes (part) ”.

Move/Rotate the complete part.: See Section 7.6.4.6, “ Move/Rotate... (part) ”.

Scale: See Section 7.6.4.4, “ Scale ”.

Mirror: See Section 7.6.4.7, “ Mirror ”.

Transparency:

Measure:

Edit... (only at fixed planes and reference planes): Calling editing dialog

Delete plane: Display of the dialog Dependencies. There, deleting can be confirmed.

Paste sketch: Inserts that sketch, which before has been copied with Copy (only sketch). See Section 7.6.7.6, “ Copy (only sketch) ”.

New sketch: See Section 7.6.2.3, “ Sketch ”.

New 2D drawing: See Section 7.6.2.4, “ 2D drawing ”.

Create pipe: See Section 7.6.2.9, “ Pipe ”.

Insert new plane: See Section 7.6.2.2, “ Reference Plane ”.

Visible: The currently selected plane is displayed permanently, even if another is selected. If you want to remove the plane again, you have to uncheck this command.

Transparency: With this option you can set transparency in order to get a better overview.

Measure:

Edit...: Calling editing dialog

Delete: Display of the dialog Dependencies. There, deleting can be confirmed.

Rename entry: The term entered here will be displayed in the tree of 3D History. (Renaming can happen via Edit... just as well.)

Feature attributes: Opens the docking window Face attributes.

Select all related faces in 3D view

Apply pattern: See Section 7.6.2.8, “Grp Pattern / Pattern”.

Convert to cut / Convert to base: See Section 7.6.8.8, “ Convert to cut / Convert to base ”.

Set mark: See Section 7.6.3.5, “ Set mark ”.

Transparency: With this option you can set transparency in order to get a better overview.

Measure:

Edit...: Calling editing dialog

Delete: Display of the dialog Dependencies. There, deleting can be confirmed.

Rename entry: The term entered here will be displayed in the tree of 3D History. (Renaming can happen via Edit... just as well.)

Copy (only sketch): See Section 7.6.7.6, “ Copy (only sketch) ”.

Cut (including dependencies): See Section 7.6.7.7, “ Cut (including dependencies) ”.

Base Rotate... / Extrude...: See Section 7.6.2.5, “ Base extrude / Base rotate ”.

Cut Rotate... / Extrude...: See Section 7.6.2.6, “ Cut extrude / Cut rotate ”.

Duplicate sketch: See Section 7.6.7.14, “ Duplicate sketch ”.

Create sweep base: See Section 7.6.2.7, “ Sweep base / Sweep cut ”.

Create sweep cut: See Section 7.6.2.7, “ Sweep base / Sweep cut ”.

Set mark: See Section 7.6.3.5, “ Set mark ”.

Transparency: With this option you can set transparency in order to get a better overview.

Measure:

Edit...: Calling editing dialog

Delete: Display of the dialog Dependencies. There, deleting can be confirmed.

Rename entry: The term entered here will be displayed in the tree of 3D History. (Renaming can happen via Edit... just as well.)

Properties: Opens the dialog 2D drawing. See Section 7.6.2.4, “ 2D drawing ”.

Set mark: See Section 7.6.3.5, “ Set mark ”.

Transparency: With this option you can set transparency in order to get a better overview.

Measure:

Edit...: Calling editing dialog

Delete: Display of the dialog Dependencies. There, deleting can be confirmed.

Rename entry: The term entered here will be displayed in the tree of 3D History. (Renaming can happen via Edit... just as well.)

Feature attributes: Opens the docking window Face attributes.

Select all related faces in 3D view:

Apply pattern: See Section 7.6.2.8, “Grp Pattern / Pattern”.

Convert to cut / Convert to base: See Section 7.6.8.8, “ Convert to cut / Convert to base ”.

Set mark: See Section 7.6.3.5, “ Set mark ”.

Paste sketch: Inserts that sketch, which before has been copied with Copy (only sketch). See Section 7.6.7.6, “ Copy (only sketch) ”.

(Not displayed, if more than one face is selected.)

Face attributes: Opens the docking window Face attributes.

New Chamfer/Fillet...: See Section 7.6.2.10, “ Blend (Insert Chamfer/Fillet...) ”.

Create drill on selected surface: See Section 7.6.2.13, “ Drill Feature ”.

(Not displayed, if more than one face is selected.)

Generate sketch on selected face: See Section 7.6.2.3, “ Sketch ”.

(Not displayed, if more than one face is selected.)

Create plane on selected Face: See Section 7.6.2.2, “ Reference Plane ”.

Visible in this configuration: See Section 7.6.10, “Level of detail”.

(Not displayed, if more than one face is selected.)