 |
- 7.6.2.1. Fixed plane
- 7.6.2.2. Reference Plane
- 7.6.2.3. Sketch
- 7.6.2.4. 2D drawing
- 7.6.2.5. Base extrude / Base rotate
- 7.6.2.6. Cut extrude / Cut rotate
- 7.6.2.7. Sweep base / Sweep cut
- 7.6.2.8. Grp Pattern / Pattern
- 7.6.2.9. Pipe
- 7.6.2.10. Blend (Insert Chamfer/Fillet...)
- 7.6.2.10.1. What is the purpose of the Blend Feature
- 7.6.2.10.2. What is NOT the purpose of the Blend Feature
- 7.6.2.10.3. Basics - Create chamfer or fillet
- 7.6.2.10.4. General tips & notes
- 7.6.2.10.5. What should be considered
- 7.6.2.10.5.1. All blends, whose edges meet, have to be made as one blend
- 7.6.2.10.5.2. Blends in pattern
- 7.6.2.10.5.3. Tangent continuous
- 7.6.2.10.5.4. Preview presentation and Edge visualization for Chamfer/Fillet
- 7.6.2.10.5.5. Face selection
- 7.6.2.10.5.6. Combination of Sweep and Blend
- 7.6.2.10.5.7. Depiction of Chamfer/Fillet in different CAD systems
- 7.6.2.10.6. Not supported installation situations
- 7.6.2.10.6.1. Function "Generate sketch on selected face" needs at least one edge without Blend
- 7.6.2.10.6.2. Several intersecting chamfers/fillets and Blend feature in addition
- 7.6.2.10.6.3. Edges resulting from Blends
- 7.6.2.10.6.4. Maximum radius of Chamfer/Fillet
- 7.6.2.10.6.5. Blends whose edges meet with different size each
- 7.6.2.10.6.6. Combination of a fillet and a chamfer
- 7.6.2.10.6.7. Radius of chamfer/fillet larger than distance to adjoining geometry
- 7.6.2.11. Text Feature
- 7.6.2.12. Texture label
- 7.6.2.13. Drill Feature
The following elements may occur in the docking window "3D History". Often calling can happen at different places (e.g. via context menu command on elements of the 3D History or 3D view, just as well via toolbar icons).
